LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (42 Rear Wheel Suspension Drive Shaft 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 421119 Removing And Installing Trailing Arm >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift the vehicle.

    > 4X00IN LIFTING THE VEHICLE

  2. Remove wheel.

    > WM, 440519 REMOVING AND FITTING WHEEL

  3. Remove cover for centre underbody.

    > WM, 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY

  4. Remove coil spring or release air from air spring.

    > WM, 427219 REMOVING AND INSTALLING COIL SPRING 

    > WM, 430117 BLEEDING AND FILLING THE LEVELLING SYSTEM