LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (20 Fuel Supply, Actuator 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 207019 Removing And Installing Control Unit For Fuel Pump >> Installing Control Unit For Fuel Pump

Installing Control Unit For Fuel Pump

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for nut on holder for fuel pump control unit: > Tightening torque 3 Nm (2 ftlb.) 

scientia non olet · About LEMON Manuals