LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (20 Fuel Supply, Actuator 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 206619 Removing And Installing Fuel Pump >> Removing Fuel Pump

Removing Fuel Pump

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Toxic substances 
  • Danger of poisoning or suffocation 
  • Danger of burns to the eyes and skin 

    → Ventilate the work area well.

    → Never ingest or inhale.

    → Read specific information on the Hazard Sheet.

    → Wear personal protective gear.

    → Do not smoke, eat or drink in the work area.

WARNING: Highly inflammable or explosive materials 
  • Danger of fire or explosion 

    → Avoid contact with hot parts or sources of ignition.

    → Use suction to remove ignitable vapors.

    → Attach warning sign in a clearly visible position.

    → Contain leaked media using non-flammable absorbent material and put it in a container designed for this purpose for disposal in accordance with local requirements.

    → Secure collection containers/vessels to prevent them from tipping over.

  1. Remove filling line for anti-swirl chamber -1-  .
    1. 1.1 Release quick-connecting lock on filling line for anti-swirl chamber -1-  (-arrow A-  ).
    2. 1.2 Pull off filling line for anti-swirl chamber -1-  (-arrow B-  ) and set it aside.
    G15876768Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing filling line for anti-swirl chamber

  2. Remove lines from auxiliary chamber to sucking jet pump -2 and 3-  .
    1. 2.1 Release quick connector -1-  .
    2. 2.2 Disconnect pressure line from auxiliary chamber to sucking jet pump -2-  from the swirl chamber.
    3. 2.3 Disconnect sum line from auxiliary chamber to sucking jet pump -3-  from the swirl chamber.
    G15876769Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Lines from auxiliary chamber to sucking jet pump

  3. Unclip sucking jet pump line -1-  from the swirl chamber -arrow-  .
    G15876770Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Sucking jet pump line

  4. Remove fuel pump.
    1. 4.1 Loosen anti-swirl chamber from the bayonet lock by turning it anti-clockwise -arrow A-  .
    2. 4.2 Place anti-swirl chamber on the side surface -arrow B-  .
      G15876771Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Loosening anti-swirl chamber

    3. 4.3 Release locking lugs -arrows A-  .
    4. 4.4 Guide pump insert -1-  out of the anti-swirl chamber -arrow B-  .
    5. 4.5 Carefully guide the pump insert -1-  out of the fuel tank -arrow C-  . Do not soil the interior of the vehicle while doing this.
    G15876772Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing fuel pump