Draining Fuel
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- PIWIS Tester must be connected and switched on.
- Switch on ignition (fuel pump is activated briefly).
- Drain fuel using the Tester routine in the PIWIS Tester
.
- 3.1 Select the Diagnostics function.
- 3.2 Select the DME control unit in the control unit overview.
- 3.3 Switch to the Drive links/checks menu item.
- 3.4 Select All in the Drive links/checks menu item and press F12=Next.
- 3.5 Select the Drain fuel tank function and press F12 = Next.
- 3.6 Activate the Drain fuel tank (= activate fuel pump) function by pressing F8 = Start. The process can be ended at any time by pressing F8 = Stop if the canister needs to be emptied.
- 3.7 As soon as the required amount of fuel has been drained, deactivate the Drain fuel tank function by pressing F8 = Stop.
- 3.7.1 Exit the function.
- 3.8 Switch off ignition, switch off the PIWIS Tester and disconnect adapter line in the vehicle.