LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (20 Fuel Supply, Actuator 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 201019 Removing And Installing Fuel Tank >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set up a warning sign No naked flames, fire, open ignition sources or smoking  in a clearly visible position in the work area or on the vehicle > Example of a warning sign  .
    G15876689Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Example of a warning sign

  2. Empty the fuel tank.

    > WM, 2010EN EMPTYING AND FILLING THE FUEL TANK 

  3. Disconnect the battery.
  4. Remove cover for centre underbody at the left and right.

    > WM, 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY

  5. Remove exhaust system.

    > WM, 260119 REMOVING AND INSTALLING EXHAUST SYSTEM

  6. Remove heat shield on tunnel.

    > WM, 261420 REMOVING AND INSTALLING HEAT SHIELDS

  7. Remove rear cardan shaft.

    > 393519 REMOVING AND INSTALLING REAR CARDAN SHAFT

  8. Remove right rear seat.

    > 724819 REMOVING AND INSTALLING REAR SEAT

  9. Remove rear axle (spring struts and rear axle housing) without further disassembly.

    > 420519 REMOVING AND INSTALLING REAR AXLE HOUSING