Technical Values
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location |
Des... |
Type |
Basic val... |
Toleranc... |
Toleranc... |
| Screw for balance weight |
Replace following removal. |
Initial tightening |
40 Nm (30 ftlb.) |
|
|
| Screw for balance weight |
Replace following removal. |
Torque angle |
+ 90° |
|
|
| Screws for balance shaft end plate |
|
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|