Subsequent Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Install balance shaft bracing wheel.
> WM, 138019 REMOVING AND INSTALLING BALANCE SHAFT BRACING WHEEL (V6 TURBO)
Fit new screw -1- on balance weight -2- .
1. 2.1 Get another person to counter the crankshaft if necessary.
2. 2.2 Counter the crankshaft using > T40049 - special wrench , fit new screw -1- and tighten to > Initial tightening 40 Nm (30 ftlb.) and > Torque angle + 90° .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Balance weight screw
Install crankcase cover.
> 101419 REMOVING AND INSTALLING CRANKCASE COVER (V6 TURBO)