Installing Drive Belt For Air-Conditioning Compressor

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Routing of drive belt for air-conditioning compressor

1	Vibration damper
2	Tensioning device for drive belt for air-conditioning compressor
3	Air-conditioning compressor
4	Deflection roller

Fit drive belt for air-conditioning compressor.
1. 1.1 Fit drive belt for air-conditioning compressor on the pulleys and align it along the grooves on the pulleys.
2. 1.2 To tension the drive belt, swivel the tensioning device anti-clockwise using a TORX T55 socket wrench -arrow B- . (The tensioning device remains tensioned.)
3. 1.3 Tighten screw -1- .
  > Tightening torque 25 Nm (19 ftlb.)
4. 1.4 Check that the drive belt is seated and tensioned correctly.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tensioning drive belt for air-conditioning compressor