LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (13 Engine - Crank Drive, Pistons 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 137519 Removing And Installing Crankshaft Vibration Damper (V6 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install deflection roller for V-belt (air-conditioning compressor) -2-  .
    1. 1.1 Fit deflection roller for V-belt (air-conditioning compressor) -2-  and screw in and tighten new screw -1-  > Tightening torque 25 Nm (19 ftlb.) 
      G15821409Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Deflection roller for V-belt (air-conditioning compressor)

    2. 1.2 Install cover on deflection roller -1-  .
    G15821410Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Deflection roller cover

  2. Install ATF cooling line (front section).

    > WM, 386219 REMOVING AND INSTALLING ATF COOLING LINE (FRONT SECTION)

  3. Install belt tensioner (air-conditioning compressor).

    > 137319 REMOVING AND INSTALLING BELT TENSIONER (AIR-CONDITIONING COMPRESSOR)