Removing Crankshaft Vibration Damper (V6 Turbo)

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fit counterhold tool T40330/1 .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Counterhold tool T40330 on vibration balancer
1. 1.1 Turn the crankshaft so that counterhold tool T40330/1 can be fitted.
2. 1.2 Fit adapter T40330/4 -2- to the crankshaft vibration damper using counterhold tool T40330/1 -4- .
3. 1.3 Fit spacer sleeve T40330/3 -3- underneath, then fit and tighten screw -Arrow- .
  > Tightening torque 23 Nm (17 ftlb.)
4. 1.4 Loosen and unscrew screw -1- .
Remove counterhold tool T40330/1 .
Remove crankshaft vibration damper.