LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (13 Engine - Crank Drive, Pistons 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 134819 Removing And Installing Crankshaft (V6 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install sprocket for oil pump.

    > Removing and installing oil pump (V6 Turbo) 

  2. Install crankcase cover.

    > Removing and installing crankcase cover (V6 Turbo) 

  3. Install pistons.

    > Removing and installing pistons (V6 Turbo) 

  4. Install timing chain.

    > Removing and installing timing chain (V6 Turbo) 

  5. Install engine.

    > Removing and installing engine 

  6. Loosen engine from assembly support.

    > Securing engine on assembly support (V6 Turbo) 

  7. Fill in engine oil.

    > Draining and filling engine oil