LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (13 Engine - Crank Drive, Pistons 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 134819 Removing And Installing Crankshaft (V6 Turbo) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine.

    > Removing and reinstalling engine 

  2. Secure engine to assembly support.

    > Securing engine on assembly support (V6 Turbo) 

  3. Drain engine oil.

    > Draining and filling engine oil 

  4. Remove crankcase cover.

    > Removing and installing crankcase cover (V6 Turbo) 

  5. Remove timing chain.

    > Removing and installing timing chain (V6 Turbo) 

  6. Remove piston.

    > Removing and installing pistons (V6 Turbo) 

  7. Remove oil pump sprocket.

    > Removing and installing oil pump (V6 Turbo)