Measuring Cylinder Bore
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Using the cylinder gauge VAS 6078
, take measurements as shown > Diagram for measuring cylinder bore
at three points in the cylinder, crosswise in transverse direction A
and in longitudinal direction B
.
Diagram for measuring cylinder bore
Cylinder bore New in mm Maximum permitted deviation from nominal measurement in mm Note Nominal measurement 84.510 ± 0.005 0.08 Measure cylinder bore depth of 50 mm.