Removing Cylinder Head (Right Cylinder Bank)

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Remove additional coolant pump.
1. 1.1 Unscrew screws on coolant line holder -1- .
2. 1.2 Unscrew screw on coolant flange -2- and pull off the flange.
3. 1.3 Remove additional coolant pump with coolant lines.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Additional coolant pump
Remove side coolant pipe -1- by unscrewing screw -2- and removing coolant pipe.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Side coolant pipe on right cylinder bank
Remove front coolant pipe -1- by unscrewing screw -2- and removing coolant pipe.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front coolant pipe on right cylinder bank
Remove cylinder head.
1. 4.1 Unscrew screws on cylinder head in the sequence -10 to 1- .
2. 4.2 Remove cylinder head.
Fig 1: Cylinder Head Screws Loosening Sequence
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing cylinder head on right cylinder bank