Removing Solenoid Hydraulic Valve For Valve Lift Adjustment

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

The steps described here are shown on the right cylinder bank, but also apply for the opposite side.

Lift up moulded part -3- .
1. 1.1 For better access, release and disconnect plug connections for ignition coils -1- .
2. 1.2 Release and disconnect electric plug connections for solenoid hydraulic valves for valve lift adjustment -2- .
3. 1.3 Lift up moulded part -3- for easier access to the solenoid hydraulic valve for valve lift adjustment.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Moulded part
Remove solenoid hydraulic valve for valve lift adjustment -2- .
1. 2.1 Unscrew screws on solenoid hydraulic valve for valve lift adjustment -1- .
2. 2.2 Remove solenoid hydraulic valve for valve lift adjustment -2- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Solenoid hydraulic valve for valve lift adjustment