LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (15 Engine - Cylinder Head, Valve Drive 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 153919 Removing And Installing Camshaft Controller Actuator (V6 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Only for installing camshaft controller actuator at intake side of the right cylinder bank: 

    Fill in coolant.

    > Draining and filling coolant (includes bleeding) 

  2. Install heat shield for turbocharger.

    > Removing and installing heat shield for turbocharger (V6 Turbo) 

  3. Install engine cover (design cover).

    > Removing and installing engine cover (design cover) (V6 biturbo) 

scientia non olet · About LEMON Manuals