Preliminary Work
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Remove upper chain housing cover on the relevant cylinder bank.
> 153319 REMOVING AND INSTALLING UPPER CHAIN HOUSING COVER (V6 TURBO)
NOTE: Incorrect handling of crankshafts- Risk of damage to the timing system
→ Never turn the crankshaft against the rolling direction or when the chain tensioner is removed.
→ Proceed carefully with your work.
→ Only turn the engine at the crankshaft.
→ Observe general warning notes and working regulations.
- Risk of damage to the timing system
- Turn the crankshaft using > T40263 - wrench, 21 mm and > T40314 - adapter until the vibration damper is aligned with the BDC marking on the corresponding marking on the engine.