LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (15 Engine - Cylinder Head, Valve Drive 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 153619 Removing And Installing Chain TENSIONER (V6 Turbo) >> Installing Chain TENSIONER (Cylinders 1-3 And 4-6) >> Installing Chain Tensioner

Installing Chain Tensioner

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Replace chain tensioner screws and seal.
    2. 1.2 Tighten chain tensioner screws to > Tightening torque 9 Nm (6.5 ftlb.)  .
scientia non olet · About LEMON Manuals