Technical Values
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screws securing engine carrier to engine | M10 x 45/replace | Final tightening | + 90° | ||
| Fastening screws securing engine mount to bracket | M10 x 45 | Tightening torque | 55 Nm (41 ftlb.) | ||
| Camshaft controller for outlet camshaft | Initial tightening | 30 Nm (22 ftlb.) | |||
| Camshaft controller for outlet camshaft | Final tightening | + 35° | |||
| Camshaft controller for intake camshaft | Initial tightening | 30 Nm (22 ftlb.) | |||
| Camshaft controller for intake camshaft | Final tightening | + 35° |