Technical Values
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw securing coolant line to engine, M6 | M6 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screw for lower chain housing cover | M6 x 25 (19 ea.)/replace aluminium screws with steel screws, observe specified tightening sequence | Initial tightening | 3 Nm (2 ftlb.) | ||
| Screw for lower chain housing cover | Final tightening | + 90° | |||
| Upper screws on chain housing cover in chain box | Replace following removal. | Initial tightening | 3 Nm (2 ftlb.) | ||
| Upper screws on chain housing cover in chain box | Replace following removal. | Tightening torque | 8 Nm (6 ftlb.) | ||
| Upper screws on chain housing cover in chain box | Replace following removal. | Final tightening | + 90° |