Vehicle Height With Steel Springs
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The following values refer to the DIN empty weight (DIN 70020), in other words: full fuel tank, vehicle with tyre sealant (or spare wheel, collapsible wheel) and tools, with no occupants and no luggage.
- Tyre pressure in accordance with specifications.
- On vehicles with air suspension, the vehicle must be adjusted to normal level using the Porsche System Tester.
Only align and adjust the vehicle in this position.
- If the control unit or one of the level sensors was replaced, calibration must be carried out using the Porsche System Tester.
| Vehicle height | Steel springs |
|---|---|
| Front-axle height | |
| with 19, 20, 21 inch wheels [mm] | 414±10 |
| From outer wheel Centre to bottom edge of wing | |
| Rear-axle height | |
| with 19, 20, 21-inch wheels mm | 419±10 |
| From outer wheel Centre to bottom edge of wing | |
| Maximum difference in height, left to right: 10 mm |