LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (44 Wheels, Tyres, Suspension Alignment 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 443219 Removing And Reinstalling Wheel Electronics >> Removing And Reinstalling Wheel Electronics >> Removing Wheel Electronics

Removing Wheel Electronics

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Installation position: The wheel electronics unit is located on the valve in the outer rim base.

G15891483Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Overview of wheel electronics

  1. Loosen screw -1-  for the wheel electronics unit. If necessary, counter in the bore at the valve foot using a suitable assembly pin (for example, steel pin Ø approx. 1.8 mm).
    G15891484Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Wheel electronics mounting

  2. Undo the union nut and take out the valve.