Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Camshaft controller for outlet camshaft | Initial tightening | 30 Nm (22 ftlb.) | |||
| Camshaft controller for outlet camshaft | Final tightening | + 35° | |||
| Camshaft controller for intake camshaft | Initial tightening | 30 Nm (22 ftlb.) | |||
| Camshaft controller for intake camshaft | Final tightening | + 35° | |||
| Screw plug for securing crankshaft | replace sealing ring | Tightening torque | 25 Nm (18.4 ftlb.) |