| Screws for cylinder head cover on right cylinder bank |
Replace following removal. |
Initial tightening |
8 Nm (6 ftlb.) |
|
|
| Screws for cylinder head cover on right cylinder bank |
Replace following removal. |
Torque angle |
+ 90° |
|
|
| Screws for cylinder head cover on left cylinder bank |
Replace following removal. |
Initial tightening |
8 Nm (6 ftlb.) |
|
|
| Screws for cylinder head cover on left cylinder bank |
Replace following removal. |
Torque angle |
+ 90° |
|
|
| Screw for stopper on camshaft |
|
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Vacuum line holder |
M6 screw |
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|