Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Fastening screws securing engine carrier to engine | M10 x 45/replace | Final tightening | + 90° | ||
| Fastening screws securing engine mount to bracket | M10 x 45 | Tightening torque | 55 Nm (41 ftlb.) | ||
| Camshaft controller for outlet camshaft | Initial tightening | 30 Nm (22 ftlb.) | |||
| Camshaft controller for outlet camshaft | Final tightening | + 35° | |||
| Camshaft controller for intake camshaft | Initial tightening | 30 Nm (22 ftlb.) | |||
| Camshaft controller for intake camshaft | Final tightening | + 35° |