Installing Drive Belt For Generator

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Routing of drive belt for generator

1. Fit drive belt for generator.
   1. 1.1 Fit drive belt for generator on the pulleys and align it along the grooves on the pulleys.
   2. 1.2 To tension the drive belt, swivel the tensioning device anti-clockwise using a ring wrench -arrow-  .
   3. 1.3 > T10060A - Staking mandrel  must be removed from the tensioning device.
   4. 1.4 Slowly swivel out the ring wrench to its original position.
   5. 1.5 Check that the drive belt is seated and tensioned correctly.

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Tensioning drive belt for generator