Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| screws for crankshaft bearing covers | Replace following removal. | Initial tightening | 30 Nm (22.1 ftlb.) | ||
| Screws for crankshaft bearing covers | Replace following removal. | Torque angle | + 90° | ||
| Screws for crankshaft bearing covers, side | Replace following removal. | Tightening torque | 20 Nm (14.8 ftlb.) | ||
| Screws for crankshaft bearing covers, side | Replace following removal. | Torque angle | + 90° | ||
| Screw on guide rail for oil pump | Tightening torque | 9 Nm (6.5 ftlb.) |