LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 10 Engine - Crankcase, Suspension 2.9L Turbo Gas -- 971 - PANAMERA (971) >> WM, 108319 Removing And Installing Engine Cover (Design Cover) (V6 Turbo) >> Installing Engine Cover (Design Cover)

Installing Engine Cover (Design Cover)

NOTE: Components not fitted when engine is running or during test drive 
  • Risk of damage to components due to reduced cooling performance 

    → Before starting the engine, make sure that all air-supply components are completely fitted.

    → Only start the engine when the heat shields and design cover are fitted.

    → Only test-drive the vehicle when all underbody panelling, heat shields and the design cover are fitted.

  1. Install design cover -1-  .
    1. 1.1 Press design cover -1-  evenly onto the fastening points -arrows-  .
    G15822065Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Design cover

  2. Check that the design cover is seated correctly.
scientia non olet · About LEMON Manuals