Removing Pressure Pipe

Information 

The procedure for removing and installing is described for one side as an example. The procedure for the other side is almost identical.

1. Disconnect hoses -1-  and -2-  on the pressure pipe -3-  .
   1. 1.1 Loosen screw-type clamp -4-  and pull off connecting hose -1-  .
   2. 1.2 Loosen screw-type clamp -5-  and pull off pressure hose -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Pressure hose from turbocharger to charge-air cooler

2. Remove pressure pipe -1-  at the turbocharger.
   1. 2.1 Release and disconnect electric connector for temperature sensor -2-  .
   2. 2.2 Unscrew screws -3-  .
   3. 2.3 Remove pressure pipe -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Pressure pipe on turbocharger