LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 Exhaust Gas Turbocharging 2.9L Turbo Gas -- 971 - PANAMERA (971) >> WM, 212419 Removing And Installing Intake Manifold (V6 BITURBO) >> Installing Intake Manifold

Installing Intake Manifold

  1. Install intake manifold.
    1. 1.1 Check intake manifold seal and replace it if damaged.
    2. 1.2 Tighten screws securing intake manifold to turbocharger to > Tightening torque 9 Nm (6.5 ftlb.)  .
    3. 1.3 Tighten screw-type clamp to > Tightening torque 3.5 Nm (2.5 ftlb.)  .
  2. Further installation is performed in reverse order.
scientia non olet · About LEMON Manuals