| Front-axle support (front section) to front-axle carrier |
Hexagon-head bolt, M10 x 40 |
Tightening torque |
55 Nm (41 ftlb.) |
|
|
| Front-axle support (front section) to front-axle carrier |
Hexagon-head bolt, M8 x 30 |
Tightening torque |
30 Nm (22 ftlb.) |
|
|
| Front-axle support (rear section) to front-axle carrier |
Multiple-tooth screw, M8 x 30 |
Tightening torque |
30 Nm (22 ftlb.) |
|
|
| Screws for decoupling elements/front-axle support |
M5 x 8 |
Tightening torque |
6 Nm (4.5 ftlb.) |
|
|
| Screws for holder for ATF lines or heat exchanger/front-axle support |
M6 x 20 |
Tightening torque |
8 Nm (6 ftlb.) |
|
|