| Brake disc Ø, front |
420 mm |
| Brake disc Ø, rear |
390 mm |
| Brake disc thickness, front |
40 mm |
| Brake disc thickness, rear |
32 mm |
| Thickness tolerance of brake disc, max. |
0.01 mm |
| Effective brake disc Ø, front |
324.6 mm |
| Effective brake disc Ø, rear |
321.6 mm |
| Brake pad area per wheel, front |
330 cm2 |
| Brake pad area per wheel, rear |
153.8 cm2 |
| Pad thickness, front |
Wear limit 2 mm |
approx. 8.4 mm |
| Pad thickness, rear |
Wear limit 2 mm |
approx. 11.9 mm |
| Wear limit of front and rear brake discs |
Measure using VAS 6813 test equipment. Note measuring prerequisites. New values/wear values and three measuring points are lasered onto the brake disc hub. Wear value reached: Replace PCCB brake discs on both sides of the axle. |
Measured value |
XX/XX Read value on brake disc hub |
| Thickness tolerance of brake discs (max.) |
Measured value |
0.02 mm |
| Lateral runout of brake disc (max.) |
Measured value |
0.03 mm |
| Lateral runout of wheel hub (max.) |
Measured value |
0.03 mm |
| Lateral runout of brake disc when installed (max.) |
Measured value |
0.06 mm |