Installing Rear Roof Sun Blind Mechanism

Information 

• Some of the repair illustrations show only one side of the vehicle  .
• Also complete certain steps on the opposite side of the vehicle as well  .

Information 

Do not grease sun blind sliders and operating cables.

Information 

The help of another person is required.

1. Insert rear roof sun blind mechanism -2-  and screw in and tighten screws -1-  > Tightening torque 2 Nm (1.5 ftlb.) 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Rear roof sun blind mechanism

   Information 

   Make sure that the guide piece -1-  is inserted.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Guide piece

2. Install bracket for rear roof sun blind motor -3-  .
   1. 2.1 Insert bracket for rear roof sun blind motor -3-  and position drive cables for the sun blind in the guides.
   2. 2.2 Screw in and tighten screws -2-  > Tightening torque 2 Nm (1.5 ftlb.) 
   3. 2.3 Screw in and tighten screws -1-  > Tightening torque 2.5 Nm (2 ftlb.) 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bracket for rear roof sun blind motor