Removing Control Unit For Panoramic Roof

NOTE: Voltage peaks

Risk of damage to electrical load or to the control unit
→ Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).

→ Switch off electrical loads before disconnecting or removing them.

Information

Always comply with the regulations for handling ESD-sensitive components!

Always wear approved work clothes and shoes when carrying out assembly work .
Do not remove new part from ESD (electrostatic discharge) protective packaging until shortly before installation and only at the installation position .
Do not touch electric pins and plug contacts .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of control unit for panoramic roof

Release and unplug electric plug connections -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disconnect the electric plug connections
Release locking lug -3- .
Remove control unit for panoramic roof -1- through the opening on the headliner -arrow- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unclipping control unit for panoramic roof