Preparing Roof Cut-Out For Roof Assembly

Information 

• The surface coating of adhesive residue helps new adhesive to stick. Keep cut surfaces clean and free of grease and do not clean with cleaning solution  .

1. When removing adhesive residue of the adhesive bead -1-  with a cutter and flashing knife on the body, ensure that a surface coating of adhesive residue remains.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing adhesive residue

   Information 

   • A drying time of 10 minutes must be observed between cleaning the bonding surface and applying primer! There must be no cleaning solution residues left on the body  .
2. Clean new paint surfaces and damaged areas of the top coat paint in the non-visible area of the roof cut-out in the body with cleaning solution -H1-  and touch up with primer -H2-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cleaning and priming paint surfaces and damaged areas