Assembling Rear Backrest Frame
- Assembly is performed in reverse order. Pay particular attention to the following:
Tightening torque for screw on side holder: > Tightening torque 6 Nm (4 ftlb.)
Tightening torque for screws on clip: > Tightening torque 9 Nm (6.5 ftlb.)
Tightening torque for bolt on lock for load-through provision: > Tightening torque 50 Nm (37 ftlb.) +/- 5 Nm (3.5 ftlb.)
Tightening torque for screws on armrest holder: > Tightening torque 9 Nm (6.5 ftlb.)