Installing Trailer Hitch Motor

1. Secure trailer hitch motor.
   1. 1.1 Position trailer hitch motor.
   2. 1.2 Screw in and tighten screws -1-  > Tightening torque 3 Nm (2 ftlb.) 

      Information 

      Check circlip and replace it if necessary.

   3. 1.3 Fit circlip -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Tightening trailer hitch motor

2. Install new  bevel gear.
   1. 2.1 Align the bevel gear in such a way that screws and markings are aligned.
   2. 2.2 Screw in and tighten nut > Screwing in and tightening nut  > Tightening torque 6 Nm (4.5 ftlb.) 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Screwing in and tightening nut

3. Install lower trailer hitch housing section.
4. Plug in electric plug connections on the trailer hitch motor -arrows A-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Connecting electric plug connections

5. Push the trailer hitch housing together -Arrows-  and turn -arrow A-  to lock it.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Locking trailer hitch housing

6. Screw in and tighten screws -1-  on the trailer hitch housing > Tightening torque 5 Nm (3.5 ftlb.) 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screwing in and tightening screws