LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 66 Exterior Equipment - Coupe -- 971 - PANAMERA (971) >> WM, 664719 Removing And Installing Moulding For Rear Lid >> Installing Moulding For Rear Lid

Installing Moulding For Rear Lid

  1. Installation is performed in reverse order. Pay particular attention to the following:

Tightening torque for screw on tailgate cover: > Tightening torque 4 Nm (3 ftlb.) 

Tightening torque for screws on middle cover: > Tightening torque 4 Nm (3 ftlb.) 

scientia non olet · About LEMON Manuals