Subsequent Work
- Connect the battery.
> Work instructions after disconnecting the battery
- Insert tray with breakdown kit.
- Clip in cover -3-
and screw in and tighten screws -2-
> Tightening torque 1.5 Nm (1.1 ftlb.)
Installing cover
- Install battery cover -1-
.
Installing battery cover
- Install trim panel for luggage compartment (luggage compartment cover) at the left side.
> WM, 700619 REMOVING AND INSTALLING (SIDE) LUGGAGE COMPARTMENT TRIM PANEL (LUGGAGE COMPARTMENT COVER)
- Install side trim panel for rear luggage compartment at the left.
> 700319 REMOVING AND INSTALLING SIDE TRIM PANEL FOR REAR LUGGAGE COMPARTMENT
- Install centre trim panel for luggage compartment (luggage compartment cover).