Subsequent Work
- Secure torque support to the bracket.
- Install front trim panel (engine compartment).
> WM, 700219 REMOVING AND REINSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT)
- Install heat shield for high-pressure pump.
> Remove and install high-pressure pump (V6 Turbo)
- Install engine mount at the left and right.
> Remove and install engine mount
- Install anti-roll bar mount.
> Remove and install anti-roll bar mount
- Install front-axle support (front section).
> Remove and install front-axle support
- Install torque support on the bracket.
- Install front trim panel (engine compartment).
> WM, 700219 REMOVING AND REINSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT)
- Install heat shield for high-pressure pump.
> Removing and installing high-pressure pump
- Install catalytic converter for bank 2.
> Removing and installing catalytic converter (V6 BT)
- Install engine mount.
> Removing and reinstalling engine mount
- Install all-wheel final drive.
> Removing and installing all-wheel final drive (V6)
- Install primary catalytic converter for bank 1.
> Removing and installing primary catalytic converter (V6 biturbo)