Removing Disconnection Element
- Press locking lug -1-
and open cover on positive terminal -2-
.
Opening cover on positive terminal
- Screw off nut -1-
and remove the line.
Unscrewing nut
- Unscrew nuts -1-
and -2-
.
Unscrewing nuts
- Unscrew screw -3-
, remove lines -4-
and set them aside.
Removing lines
- Unscrew nut -1-
and remove disconnection element -2-
from the positive terminal.
Loosening disconnection element
- Unclip cover -1-
and release and disconnect electric plug connection -2-
.
Releasing and pulling off electric plug connection
- Remove disconnection element.