Securing Main Wire Harness In Passenger Compartment At The Right
- Installation is performed in reverse order. Pay particular attention to the following:
Tightening torque for nut on ground lines at the B-pillar: > Tightening torque 9 Nm (6.5 ftlb.)
Tightening torque for nut on fuse carrier: > Tightening torque 9 Nm (6.5 ftlb.)
Tightening torque for screws on PCC/PVTS control unit holder: > Tightening torque 9 Nm (6.5 ftlb.)
Tightening torque for nuts on ground lines on centre tunnel: > Tightening torque 9 Nm (6.5 ftlb.)