Subsequent Work
- Install heat shields for rear silencer.
> Removing and installing rear heat shields
- Install heat shields for rear bumper.
> Removing and installing rear heat shields
- Install fuel tank.
> Removing and installing fuel tank
- Install rear wheel housing liner.
> Removing and installing rear wheel housing liner
- Screw in and tighten screws -2-
in covers -3-
> Tightening torque 1.5 Nm (1.1 ftlb.)
Luggage compartment covers
- Secure the headliner.
- Install trailer hitch control unit.
- Install PASM control unit.
- Install (lower part of) C-pillar trim panel.
> 706819 REMOVING AND INSTALLING (LOWER PART OF) C-PILLAR TRIM PANEL
- Install tail light.
- Secure fuse box in the luggage compartment.
> 978409 LOOSENING AND SECURING FUSE BOX IN THE LUGGAGE COMPARTMENT
- Connect cable for fuse elements and B+ line and close power distributor (main fuse box).
> WM, 978919 REMOVING AND INSTALLING 48-VOLT POWER DISTRIBUTOR
- Install (centre) luggage compartment trim panel (luggage compartment cover).
> 700619 REMOVING AND INSTALLING (CENTRE) LUGGAGE COMPARTMENT TRIM PANEL (LUGGAGE COMPARTMENT COVER)
- Install (side) luggage compartment trim panel (luggage compartment cover).
> 700619 REMOVING AND INSTALLING (SIDE) LUGGAGE COMPARTMENT TRIM PANEL (LUGGAGE COMPARTMENT COVER)
- Connect the battery.
> Work instructions after disconnecting the battery