Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Screws for positive lines for fuse box in engine compartment | Items 1 and 2 | Tightening torque | 8 Nm (6 ftlb.) | ||
|
Screws for positive lines for fuse box in engine compartment |
|||||
| Nut on ground line at front side member | Item 1 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
|
Nut on ground line at front side member |
|||||
| Nuts on frame for grommet for main wire harness in front wheel housing | Item 1 | Tightening torque | 6.7 Nm (4.8 ftlb.) | ||
|
Nuts on frame for grommet for main wire harness in front wheel housing |
|||||
| Screws on cable duct for main wire harness in front wheel housing | Item 1 | Tightening torque | 4.5 Nm (3.25 ftlb.) | ||
|
Screws on cable duct for main wire harness in front wheel housing |
|||||
| Ground line to front PDCC (EAWS) control unit | Item 1: Internal hexagon roundhead bolt, M5 | Tightening torque | 5.6 Nm (4 ftlb.) | ||
|
Disconnecting ground lines |
|||||