Preliminary Work

Information 

On vehicles with air suspension, set the chassis height to Normal level (MEDIUM HEIGHT). 

1. Before calibrating the front camera, a basic initial measurement must be performed.

   > WM, 449503 PERFORMING FRONT AND REAR SUSPENSION ALIGNMENT

   Write down or print the basic initial measurement values.

   Park the vehicle on a levelled wheel alignment platform or on a level surface and set up the calibration unit > VAS 6430/1A - Setting Device with Reflector  , > VAS 6430/4 - Lane Departure Warning Calibration Plate  , > VAS 6350A - Calibration unit  and VAS 6350 wheel centre mountings in front of the vehicle in accordance with the instructions on the wheel alignment computer and PIWIS Tester.