Removing Light Bulb Control Unit

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Always wear approved work clothes and shoes when carrying out assembly work. 
• Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation. 
• Do not touch electric pins and plug contacts. 

1. Unscrew screws -2-  and loosen LED module -1-  until the electric plug connection -3-  is accessible.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Loosening LED module

2. Release and disconnect electric plug connection -3-  and remove LED module -1-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing LED module