Subsequent Work
- Install switch console control panel.
> 962719 REMOVING AND INSTALLING SWITCH CONSOLE CONTROL PANEL
Information
If air jet was replaced, it must be taught using the PIWIS Tester.
- > 9900 - PIWIS Tester 3
must be connected. Then teach the air vent.
- 2.1 Select "Air conditioning" control unit.
- 2.2 Select "Maintenance and repairs".
- 2.3 Select and start "Teach: LIN automatic addressing".
- 2.4 Select and start "Alignment drive for LIN servo motors".
- 2.5 > 9900 - PIWIS Tester 3 must then be shut down and disconnected.