Removing Solenoid Hydraulic Valve For Valve Lift Adjustment (Cylinder 5)
WARNING: This page is about a different variant/trim than selected.
Only for intake side of cylinder 5:
- Lift up moulded part -3-
.
- 1.1 Push wiring harness -1- aside.
- 1.2 Release and disconnect electric push-on connector -2- .
- 1.3 Lift up moulded part -3- for easier access to the solenoid hydraulic valve for valve lift adjustment.
Intake side of cylinder 5
- Unscrew fastening screws -1-
and remove solenoid hydraulic valve for valve lift adjustment -2-
.
Solenoid hydraulic valve for valve lift adjustment
Only for outlet side of cylinder 5:
- Lift up moulded part -2-
.
- 3.1 Release and disconnect electric push-on connector -1- .
- 3.2 Lift up moulded part -2- for easier access to the solenoid hydraulic valve for valve lift adjustment.
Outlet side of cylinder 5
- Unscrew fastening screws -1-
and remove solenoid hydraulic valve for valve lift adjustment -2-
.
Solenoid hydraulic valve for valve lift adjustment