Assembly Overview Of Rear Axle Differential
WARNING: This page is about a different variant/trim than selected.
Assembly overview of rear axle differential
| 1 | Rear axle differential |
| 2 | Vibration balancer (only on diesel models) |
| 3 | Screws on vibration balancer/rear axle differential > Tightening torque 15 Nm (11 ftlb.) |
| 4 | Screws on rear axle differential/rear axle > Initial tightening 60 Nm (44 ftlb.) > Torque angle 90° |
| 5 | Heat shield on rear axle differential |
| 6 | Screws for heat shield on rear axle differential > Tightening torque 6 Nm (4.5 ftlb.) |
| 7 | Screws for servo motor for rear-differential lock (for allocation, see Parts Information) > Tightening torque 8 Nm (6 ftlb.) |
| 8 | Servo motor for rear-differential lock |
Fig 2: Oil Filler Screw And Oil Drain Plug On Rear Axle Differential Components Location With Torque Specification
Oil filler screw and oil drain plug on rear axle differential
| 1 | Oil filler screw > Tightening torque 35 Nm (26 ftlb.) |
| 2 | Oil drain plug > Tightening torque 35 Nm (26 ftlb.) |