LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera 4S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (24 Fuel System - Electronic Injection 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 240919 Removing And Installing Fuel Pressure Sensor (High-Pressure Sensor) (V8 BITURBO) >> Installing Fuel Pressure Sensor (High-Pressure Sensor)

Installing Fuel Pressure Sensor (High-Pressure Sensor)

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Replace sealing ring on the fuel pressure sensor.

    Coat the thread of the union nut on the fuel pressure sensor with Microgleit DF 977S. Observe a drying time of at least 5 minutes before fitting.

    Tightening torque for fuel pressure sensor: > Tightening torque 20 Nm (15 ftlb.) 

scientia non olet · About LEMON Manuals